Advantage Gloss Laminate is a cost-effective option for a variety of applications. It combines durability with a high gloss, transparent finish.
Advantage Gloss Laminate is suitable for litho printing processes.
It is suitable to be used on media with offset inks.
The CO2 emissions from this product can be mitigated through the Carbon Capture® programme, directly supporting the work of the Woodland Trust.
Advantage Gloss Laminates are typically used for book covers, brochures, postcards and magazines.
The storage/transport are carried out in dry, covered and clean warehouses/ means of transport.
The film should be stored away from heat sources, without direct sunlight or UV radiation.
The recommended temperature for storage transport is 10 – 300C. If the temperature is not in these limits you can observe problems as below:
- Decrease of dyne level
- Higher haze of the film
- Poor adhesion of the film surface that can be a problem for laminating and printing
- Extremely low COF may create problems for next processing.
Excessive humidity can be a reason for film blocking.
It is recommended that BOPP thermal laminating film should be allowed to reach operating room temperature for 24 hours before use.
It is advisable that the BOPP thermal laminating film should be laminated because the metalized layer is not resistant to scratches. Before printing on metalised films, it is strongly recommended to apply a primer.
Adherence to the above mentioned storage conditions ensures that the film is suitable to be used up to 6 months after the date from production of metalised film.
Coming soon!